What to do if the heater doesn’t dissipate heat well
As winter deepens, the problem of heating dissipation has become the focus of attention for many families. The heating issues that have been hotly discussed across the Internet recently are mainly focused on uneven heat dissipation, insufficient temperature, and loud noise. This article will provide you with detailed solutions based on the hot data of the past 10 days.
1. Common causes of poor heating dissipation
| Reason | frequency of occurrence | solution |
|---|---|---|
| clogged pipes | 35% | Clean the pipes or ask professionals to clear them |
| Gas accumulation in radiator | 28% | Exhaust treatment, open the exhaust valve |
| Insufficient water pressure | 20% | Check water pressure and refill to normal value |
| Radiator aging | 12% | Replace with new radiator |
| other reasons | 5% | Check the system or contact service |
2. Solutions to heating and cooling problems that are hotly discussed across the internet
According to the analysis of hotspot data in the past 10 days, the following are the solutions that netizens are most concerned about:
| solution | Discussion popularity | Difficulty of implementation |
|---|---|---|
| Radiator exhaust | high | simple |
| Clean heating system | Middle to high | medium |
| Adjust water pressure | in | simple |
| Install radiator | medium low | more difficult |
| Replace with new radiator | low | difficult |
3. Detailed steps to solve the heating problem
1. Radiator exhaust treatment
This is the simplest and most effective method. First turn off the heating system and locate the exhaust valve on the radiator, usually located on the top of the radiator. Use a special tool or flat-blade screwdriver to slowly open the exhaust valve until water flows out, then close it immediately. Pay attention to preparing water containers to avoid getting the ground wet.
2. Check and adjust water pressure
The water pressure of a normal heating system should be between 1-2bar. If the pressure is too low, the water replenishment valve needs to be opened to replenish the water pressure; if the pressure is too high, the pressure needs to be reduced by draining water. Please make sure the system is turned off before operating.
3. Clean the heating system
If the radiator is used for more than 5 years, it is recommended to have it professionally cleaned. Cleaning is divided into two methods: chemical cleaning and physical cleaning:
| Cleaning method | Advantages | Disadvantages |
|---|---|---|
| chemical cleaning | Clean thoroughly | May corrode pipes |
| Physical cleaning | Safety and environmental protection | Cleanliness is limited |
4. Improve radiator heat dissipation efficiency
In addition to the above methods, heat dissipation efficiency can also be improved through the following methods:
- Avoid placing furniture or obstructions in front of the radiator
- Wipe the dust on the surface of the radiator regularly
- Install reflective film behind the radiator
- Properly improve indoor air circulation
4. Professional maintenance suggestions
If the problem is not resolved after trying the above methods, it is recommended to contact professional maintenance personnel. According to recent maintenance market data, common maintenance costs are as follows:
| Maintenance items | Average cost (yuan) | Maintenance time |
|---|---|---|
| Radiator exhaust | 50-100 | 30 minutes |
| System cleaning | 300-500 | 2-3 hours |
| Replace radiator | 800-2000 | half a day |
| System overhaul | 500-1000 | 4-6 hours |
5. Measures to prevent heating problems
To avoid heating problems, the following precautions are recommended:
- Annual system inspection before the heating season
- Exhaust air regularly to keep the system running normally
- Pay attention to water quality and avoid using hard water
- Maintain proper water pressure
- Replace aging radiators promptly
Through the above methods, most heating problems can be effectively solved. If the problem persists, be sure to contact a professional for inspection and repair to ensure safe and stable heating in winter.
check the details
check the details
en
